?unique=22b6252)
?unique=22b6252)
ABH 0147 3/4" Offset Pivot Set, Floor Mounted x US32D - Stainless Steel
A 3/4" Offset pivot is defined as 3/4" from face of door to the centerline of the pivoting point. A key advantage of the floor-mounted pivot set is that it distributes the majority of the door's weight onto the floor.
The 0147 3/4" Offset Pivot is capable of handling doors with an undercut of up to 1" straight from the box. To achieve this maximum, the bottom arm must be surface mounted to the door's underside rather than being mortised. If you require additional spindle heights, please inquire for a quote. These extra heights may be necessary due to the addition of tile or marble flooring, or in situations involving ramps and sloped floors.
Pivot is supplied with a mix of half machine screws (1/4-20 x 3/4") intended for metal frames and half wood screws (#14 x 1-1/2") designed for wood doors. Please inform us if you require all wood screws or all machine screws.
Used for interior doors up to 4'0" x 8'0" or for exterior doors 3'6" x 7'0" weighing up to 600 lbs.
The bottom pivot is surface mounted onto floor.
3/16" vertical arm adjustment after installation.
BMHA/ANSI C07131/3530A (modified)
0180 Top Pivot included (see picture below)
*** ABH recommends that an 019 Intermediate pivot for doors above 60" tall should use one intermediate pivot in the center of the opening. An additional intermediate pivot should be used for each additional 30" in door height. ***
Special Note: The door handing information is needed upon order placement. If you are unsure of the handing of your door, please compare the picture below to your opening for clarification.
| Door Hand | LH - Left Hand or RH - Right Hand or RHR - Right Hand Reverse or LHR - Left Hand Reverse |
| Brand | ABH Mfg |
| Pivot Type | Offset Pivot |
| General - US Finishes | US32D - Satin Stainless Steel/ 630 |
| Base Material | Stainless Steel |