Hager 1129 NRP 4 1/2 Plain Bearing Half Mortise Hinge, 5 Knuckle, Steel
**** Half Mortise Hinges are Mortised in the edge of the door, Surface Mounted on face of frame ****
Screws furnished standard are 1/2" 12-24 FPHM
Hinges are .134 thickness, For 1 3/4" door thickness. For use on medium weight hollow metal doors with channel iron frames requiring medium frequency service
Stock finish is USP (prime for paint). Other finishes available by quote include: US10, US10A, US10B & US26D. Other options available by quote include special tips (hospital tip)
ANSI A8233
-Non-rising removable pin with button tip and plug
-Beveled surface leaf
-Reversible
-Steel with steel pin
-Doors with closers should use ball bearing hinges
Non-Removable Pin (NRP) for Medium Security
The Non-Removable pin has a small set screw in the body of the barrel. This set screw is tightened down against the pin. The pin has a groove in the position where the set screw makes contact, allowing the set screw to seat. The set screw is positioned so it cannot be reached unless the door is opened. If pin removal is necessary, the set screw is merely removed and the pin tapped from the bottom in the usual manner
| General - US Finishes | USP - Prime Painted |
| Brand | Hager |
| Hinge Height | 4.5" Hi |
| Hinge Grade/Thickness | Standard Wt .119 to .146 |
| Hinge Type | Half Mortise |
| Hinge Options | Plain Bearing, NRP (Non Removable Pin) |
| Base Material | Steel |
| Hinge Corners | Square |