WingIt Grab Bar Fastener 251-4 - Order 1 per flange
Corrosion-resistant stainless steel.
Install all Bobrick Grab Bar Series without backing; no need to open and reconstruct walls.
For walls with a min. of 5/8" (16mm) thick painted or tiled drywall.
Can also be used on 1/2" (13mm) thick drywall with added finished wall material.
Fastener will support 300-lb load exceeding all building code and governmental agency guidelines including ADA Accessibility Guidelines in the U.S.A.
For 2-1/2" and 3-1/2" (65 and 90mm) or deeper hollow walls with finished wall surfaces 1/4" to 1-1/2" (6 to 38mm) thick.
One fastener required for each flange.
WingIt is a trademark of WingIt Innovations, LLC.
Will work with B5806 or B6806 series grab bars
| Brand | Bobrick |